Hay cutter

Product description
Product Parameter

Hay cutter

Mobile/WhatsApp: 008613592505674

http://www.vidacrusher.com

►1. Product introduction

The machine is used for processing agricultural and animal husbandry feedstuffs such as corn stalks, straw and other crops. It is used for farming, animal husbandry, agriculture, biogas and other fields. The processing of straw, pasture and straw is suitable for raising all kinds of livestock. Chaff cutter can be used as a motor or diesel engine as a driving, suitable for breeding cattle, sheep, horses, deer and other livestock, farmers become a good helper cut grass.

►2. working principle

The new chaff cutter is mainly composed of feeding mechanism, cutting mechanism, feeding mechanism, transmission mechanism, walking mechanism, protective device and rack.

1), feeding institutions: mainly by the feeding station, up and down Cao Kun, set blade, set knife bearing seat

2), cut off the throwing institutions: mainly by the knife, cutter, locking screws and other components

3), transmission: mainly by the V-belt, drive shaft, gear, universal joints and other components

4), walking institutions: mainly composed of caster

5), protective device: by the protective cover composition

►3. Workflow

By the motor as a supporting power. The power transmission to the spindle, the other end of the spindle gear through the gear box, universal joints, etc. will be passed through the speed of power transmission to the pressure Kun, when the material to be processed into the upper and lower pressure between Kun, Holding and at a certain rate into the cutting mechanism, the high-speed rotation of the cutter after cutting out the mouth of the machine outside the mouth

►4. Performance characteristics

1, chaff machine using section structure, the grass section is used in three groups of flat oblique knife and a set of oblique blade set knife, the aircraft design to reduce the resistance of the work to improve the machine's production, the machine used in all the production of manganese The

2, chaff machine with a convenient flexibility, Zhaizhi processing is also very convenient, smashing straw weed equipment Chopsticks grass grass part of the use of double stick feed, better quality of warping, gear drive to improve flexibility and The use of life, but also increase the strength of equipment processing of forage.

3, small chaff cutter design compact structure, suitable for agricultural forage processing, the machine by the bracket and the motor frame all made of cast iron, the design method to enhance the stability of the work while reducing the equipment noise.

4, chaff cutter for cutting green, dry corn stalks, wheat straw, straw, alfalfa and a variety of crop straw and forage and so on.

►5. Repair and maintenance

1) often check whether the fasteners loose, and to tighten.

2) to strengthen the bearing, coupling, transmission box maintenance, regular filling or replacement of lubricants, grease.

3) the cutting gap adjustable chaff machine prices, according to the thickness of the crop stem to adjust the cutting gap, to ensure that the chaff machine prices work properly.

4)found that the blade edge blunt, the application of Whetstone blade on the blade.

5)each class operation is completed, should promptly remove the dust and dirt on the machine; after the end of each quarter operation, should remove the machine debris, in the working parts coated with anti-rust oil, placed in the indoor ventilation and dry place.

Motor(kw)	HR-10A	HR-11B	HR-12C	HR-13D
Diesel engine(hp)	15	7.5	5.5	4
Productivity(T/P)	≥28	≥15	≥12	≥8
Finished material length(mm)	3～12	2.5～10	2～8	1～4
Dimensions（mm）	12、18、25、 35	12、18、25、35	9、16、18 、27、32、48	15、35、11、22、26、 54