Toner crusher

The charcoal grinder is made of fine materials such as crushed carbon, beans, shavings, peanut shells, small branches, corn stalks and so on. Can be a one-time crushing into small particles of small grinder is charcoal equipment crushing raw materials equipment. Mainly
  • Product description
  • Product Parameter

Toner crusher
Email: sales@hwdcrusher.com
Mobile/WhatsApp: 008613592505674
http://www.vidacrusher.com

►1.product description:
The charcoal grinder is made of fine materials such as crushed carbon, beans, shavings, peanut shells, small branches, corn stalks and so on. Can be a one-time crushing into small particles of small grinder is charcoal equipment crushing raw materials equipment. Mainly used for small charcoal and feed processing industry.

►2.Charcoal grinder Features:
1)The product design is reasonable, reliable manufacturing quality, with a simple structure, easy operation, small size, small footprint, the provincial workers, the characteristics of power.
2) The design of automatic control of electric heating device, can be randomly adjusted dry material moisture to ensure the stability of the material forming, improve work efficiency.
3) The main parts of the product using a wear-resistant materials through special treatment, it can continue to suppress the production, durable.
4) Applicable to all kinds of biomass raw materials (corn straw, wheat straw, cotton rod, straw, rice husk, peanut shell, corn cob, branches, leaves, sawdust and other agricultural products as raw materials or wood factory foot Material) of the compression molding.

►3.Charcoal grinder works:
Charcoal grinder can be used motor, diesel engine, the host by the feeding mechanism, cutting mechanism, throwing institutions, transmission, travel agencies, protective devices and racks and other components. With reasonable structure, easy to move, automatic feeding, safe and reliable and so on.
►4.The parts are as follows:
1), feeding institutions: mainly by the feeding station, up and down Cao Kun, set the blade, set the knife bearing seat.
2), cut off the throwing institutions: mainly by the knife, cutter, locking screws and other components.
3), transmission: mainly by the V-belt, drive shaft, gear, universal joints and other components.
4), walking institutions: mainly composed of caster.
5), protective device: by the protective cover composition.

►5.Maintenance procedures
1)For each operation of 1 month, the roller bearing lubrication 1, the use of lithium grease grease.
2)Monthly inspection of the first roll of tooth wear on the wear of serious roll should be repaired or replaced.
3)Check the various fasteners at any time, no loose phenomenon.
4)Check the spring spring tightening, at any time to make the necessary adjustments.
5)Check the operation and wear of the V-belt every month to ensure the tension of the V-belt, the wear of the V-belt should be replaced.
6)Check the work of the bypass body every month.
►6.Maintenance procedures
Minor repair every six months, including:
1)Clean the pneumatic triple and solenoid valves.
2)Check if the bolts in the motor terminal box are loose and replace the damaged seals.
3)Rinse and lubricate roller bearings.
4)Check the sprocket, chain wear.
5)Check the tightening of the compression spring and make the necessary adjustments.
6)Check the wear of the crushing roller.

model weight Yield / hour power
HR-180 0.5t 0.3-0.4t 7.5w

Contact us

Telephone:

008618624980165