Causes the blockage of the straw pulverizer
Recently, a customer came to the phone and consulted the manufacturer that his straw pulverizer equipment was not discharged at the time of production. This is a very serious problem. The straw pulverizer is out of the way. First, consider what material you smash. If it is a corn stalk with large moisture, then you must stop the machine, open the machine, and clean the material in the crushing chamber. Because the straw with large moisture can easily block the sieve hole, the sieve hole is to control the size of the finished material and crush the finished material. Too small, coupled with the material's large moisture, it will easily block the sieve hole, so that the material does not go down, the induced draft fan can not be pumped out, resulting in no discharge or slow discharge.
Product List
Metal Crusher
shredder machine
Stone Crusher
Plastic Crusher
Wood Crusher
E-Waste Scrap Shredder
