Scrap Steel Crushing Line Provide Steelmaking Furnace Charge
scrap steel crushing line suitable for the refining of various large-sized and hard-to-break materials such as oil filter, scrap aluminum sheet, aluminum strip, iron sheet, scrap steel, sheet iron, copper sheet and other scrap metal materials with the advantages of uniform discharging and controllable size, etc.
How does scrap steel crushing line work? Below is the work process of scrap crushing line:
1. High-speed rotating hammer crushing can peel off the surface rust, paint and dirt of the scraps.
2. After crushing, the scraps are processed by vibrating conveyor, belt conveyor and magnetic separation systems. The iron, non-ferrous metal and non-metallic materials (such as plastic, rubber) are separated and conveyed by respective conveyors. It can not only get the crushed steel block (size is adjustable), but also get the non-ferrous metals through artificial selection. The bulk density of crushed scrap steel can be 1.2t/m3, is ideal electric steelmaking furnace charge.
3. Ferrous and non-metallic material are selected again by magnetic device on the conveyor, free iron metal is picked out, thus to improve the iron recovery. Non-ferrous metals can be selected through artificial selection.
Features ofscrap steel crushing line:
1. Booting smoothly without too much noise
2. With stiffening plate type
Should scrap steel crushing line be of interest to you, please do not hesitate to contact us, and we will response to you as soon as possible.
- Newer → Scrap Paint Bucket Crusher for Wastes Recycling
- Construction Features of Scrap Metal Crusher ← Older
