Decomposition Equipment of Waste Tyre Recycling Production Line

Waste tyre recycling production line is employed for the recycling of waste rubber and scrap tire including rubber/tire cutter, crusher, separator, etc. 

The shear between the two rollers will make tire chips into powders as well loosen rubbers, steels and textiles
Roller body made of cast steel
Surface of roller made of alloy steel, welded when worn out
One flat surface roller and one teethed roller, high throughput of powders
Bottom made of cast iron
Emergency stop when overload
Distance between the two rollers can be adjusted.
Hard gear gearbox
Equipped with screening machine, magnetic separator and fiber separator, 99% purification
Finals: 8-30 mesh

Decomposition Equipment of Waste Tyre Recycling Production Line:
Tire circle cutter
Cut open the joint of the tire’s side and top.

Tire Strip Cutter
Cut the circle of the tire into 5-8cm strips.

Tires Slice Cutter
Cut the strips into chunks about 3.5 cubic centimeters.

Rims Separator
Make the steel rims and the rubber on the mouth of tire separated.

Rubber Crusher
This rubber crusher is designed to crush the waste tire into rubber powder/particals.

Related Product/ Waste Tyre Recycling Production Line